No Sew Witch Hat Headband with Fabri-Fuse

Sharing is caring!

Create a No Sew Witch Hat Headband with Fabri-Fuse and Kunin Classic Felt. This mini witch's hat is perfect when perched on top of a headband for the biggest or littlest witch in all of us. Or it can be left solo to create a super cute and spooky piece of home decor for your tiered tray. The best part is it can be totally customized with your favorite color of Kunin Classic Felt and some fun cotton trims.

No Sew Witch Hat Headband with E6000 Fabri-Fuse by Creatively Beth #creativelybeth #e6000 #frabrifuse #witchhat #feltcrafts #headband #halloween #costume

No Sew Felt Witch Hat Halloween Costume

No Sew Witch Hat Headband with E6000 Fabri-Fuse by Creatively Beth #creativelybeth #e6000 #frabrifuse #witchhat #feltcrafts #headband #halloween #costume

This post, No Sew DIY Witch Hat Headband with Fabri-Fuse, contains affiliate links. Using links to these sites means I will earn a percentage of the purchase at no extra cost to you.

Here's what you need to make a Mini Witch Hat:

Here's how to create a No Sew Mini Wirch Hat:

STEP ONE

To begin the No Sew Witch Hat Headband, gather all supplies. The 4″ foam cones that I found at the craft store are the perfect size for the top of the headband. I love to experiment with my favorite craft supplies. Sometimes these tests are a huge craft fail, but a lot of the time they are wonderful successes. Dyeing cotton lace, trim, and twine with Unicorn SPiT Stain was one trial that was a WINNER!

No Sew Witch Hat Headband with E6000 Fabri-Fuse by Creatively Beth #creativelybeth #e6000 #frabrifuse #witchhat #feltcrafts #headband #halloween #costume

STEP TWO

Cut a 24″ length of wide cotton lace, skinny cotton lace, and cotton twine. Place each trim into a small plastic zipper bag, along with a generous squirt of Unicorn SPiT Stain Phoenix Fire, Violet Vulture, and Lavish Lovebirds. Add a splash of water, seal the zipper bag, and squish the trims around in the water and Unicorn SPiT Satin until each one has been saturated.

STEP THREE

Place a section of aluminum foil out on your work surface and carefully lift out the trims, using another plastic zipper bag over your hand as a make-shift glove. Layout the lace and twine onto the foil to dry. The non-porous surface of the foil will prevent any of the Unicorn SPiT from seeping through and staining your work table.

No Sew Witch Hat Headband with E6000 Fabri-Fuse by Creatively Beth #creativelybeth #e6000 #frabrifuse #witchhat #feltcrafts #headband #halloween #costume

STEP FOUR

Download, print, and cut out the WITCH HAT PATTERNS below ⇓ Attach the patterns to Black Kunin Classic Felt with straight pins, then cut out with scissors. Apply a line of E6000 Fabri-Fuse Liquid Fabric Glue along the perimeter of the felt, then carefully roll the foam cone inside the felt. Hold the seam closed for several minutes until the glue grabs. Set aside to dry. Once dry, attach the brim to the hat and the hat to the headband with additional Fabri-Fuse. Set aside to dry propped inside a roll of paper towel.

STEP FIVE

The roll of paper towel holds the headband perfectly in place, so you can use both hands to apply the lace trim. Attach the Lavish Lovebirds skinny lace trim around the cone of the witch's hat with Fabri-Fuse. Pleat and fold the Violet Vulture wide lace trim around the brim of the hat, securing with additional Fabri-Fuse. Tie the Phoenix Fire cotton twine around the base of the hat and finish with a bow.

No Sew Witch Hat Headband with Fabri-Fuse

Mix and match the colors and trims to create a customized witch's hat for a Halloween costume or home decor. I love using E6000 Fabri-Fuse Liquid Fabric Glue for all of my no sew craft projects. It works wonderfully with felt but also adheres to a multitude of fabrics, wood, metal, glass, rubber, and more. It goes on milky white and dries clear. Fabri-Fuse has a fast grab and sets up in about 30 minutes with full drying time in 24 hours. It is washable once dry and retains some elasticity which makes it perfect for Halloween costumes like my Witch Hat Headband.

No Sew Witch Hat Headband with E6000 Fabri-Fuse by Creatively Beth #creativelybeth #e6000 #frabrifuse #witchhat #feltcrafts #headband #halloween #costume
Shop Tombow

Whether it's to decorate your home for Halloween or create the perfect topper for that witch costume, Laura has you covered with a full-sized Felt Witch Hat DIY complete with custom-dyed feather trim! E6000 Fabri-Fuse is the perfect adhesive for all the different materials. Check out the full tutorial on her blog Me and My INKlings.

Spooky season is upon us, and Lindsay of Artsy Fartsy Mama could NOT be more thrilled about it. Halloween is one of her favorite holidays, and Lindsay especially loves crafting for it! If you're looking for something to make for a “ghouls” crafternoon, this DIY Witch Gnome is so fun and easy to make!!

Sharing is Caring!

Too busy to make this No Sew Witch Hat Headband Halloween Costume right now? Pin it for later!  I'd love for you to pin this project to your favorite craft board on Pinterest and then it’ll be waiting for you when you’re ready.

No Sew Witch Hat Headband with E6000 Fabri-Fuse by Creatively Beth #creativelybeth #e6000 #frabrifuse #witchhat #feltcrafts #headband #halloween #costume
WWYF 728x90

Thanks for stopping by!


Leave a Reply

AMAZON ASSOCIATES DISCLOSURE

Creatively Beth is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.  As an Amazon Associate, I earn from qualifying purchases.

COPYRIGHT, PHOTO USE & LINKING

You are welcome to link to Creatively Beth or use a single image with a brief description to link back to any post. Republishing posts in their entirety is prohibited. Pinning “pins” to Pinterest is always welcome!

You May Have Seen Me...