Learn how to make a DIY Beaded Necklace with Geode with simple supplies from the craft store. Have you always wanted to create custom jewelry but didn't know where to start? This step-by-step tutorial will teach you exactly how to make a trendy long necklace with a pendant using a variety of natural stone beads.
This multi-bead necklace with a geode pendant makes the perfect gift and is ideal for a crafternoon with your girlfriends. It is easy to make and goes together in about an hour.
Are you looking for more easy jewelry projects like this? Check out our full list of wearable crafts for kids (and adults) of all ages to create.
Easy Bead & Geode Necklace
This post, DIY Beaded Necklace with Geode, contains affiliate links. Using links to these sites means I will earn a percentage of the purchase at no extra cost to you.
Here's what you need to make Geode Necklace
- Natural Stone Beads – Blues and Browns
- Faceted Round Glass Beads – Brown
- Faceted Square Glass Beads – Brown
- Seed Beads – Black
- Geode Pendant
- Stringing Wire
- Multi Strand Connectors
- Lobster Claw Clasp
- Jump Ring
- Crimp Beads
- Wire Cutters
- Needle Nose Pliers (2)
- Ruler
- Small Shallow Dishes
I already had most of these supplies in my craft stash from other jewelry-making craft projects, but if you are a beginner, then this Jewelry Making Supply Kit is perfect. Boasting over 1400 pieces, it includes the tools and findings to get you started in the right direction without breaking the bank.
Here's how to create
STEP ONE
To begin the DIY Beaded Necklace with Geode, gather all supplies. Measure and cut one section of stringing wire that is 2″ longer than your final necklace length. My finished necklace is 36″, so my wire is 38″ long.
Slide a crimp bead on the strand of wire, then thread through the ring on the lobster claw clasp. Loop the wire back through the crimp bead, leaving about 1″ of the wire. Using needle nose pliers press hard and crimp the bead closed over the wires, leaving a loop at the lobster claw clasp end.
One of my go-to jewelry-making supplies is this Design Board from Beadsmith. It has multiple channels, a soft surface, and measurements included to make bracelet and necklace projects quick and easy. This board also has compartments for different beads or jewelry findings and a cover, so you can set your project aside and have it not be disturbed.
STEP TWO
Thread 12 black seed beads onto the wire, making sure that the first few beads are threaded on the main wire and the cut end, hiding the wire tail. Create your pattern using seed beads in between each of the larger beads which replicates the look of hand-knotted jewelry. It is also the perfect hack to make your necklace longer without buying more expensive beads.
STEP THREE
Continue creating the pattern on the necklace. The pattern here is as follows: square, seed, round, seed, round, seed, round, seed, square, seed, brown, seed, brown, seed, brown, seed, square, blue, seed, blue, seed, blue, seed, square. Then repeat this pattern until all beads have been strung.
STEP FOUR
Slide a crimp bead on the end of the strand of wire, then thread through a jump ring. Loop the wire back through the crimp bead, and several seed beads, leaving about 1″ of the wire. Using needle nose pliers pull on the tail of the wire to make a smaller loop. Then press hard and crimp the bead closed over the wires, leaving the loop around the jump ring.
STEP FIVE
Carefully open a jump ring using 2 sets of needle nose pliers, twisting rather than pulling apart. Slide the geode pendant onto the jump ring and find the center of the necklace. Close the jump ring by twisting the ends back together with 2 sets of needle nose pliers.
Easy Statement Necklace with Pendant
Mix and match the size, design, and color of the beads to create a custom DIY Beaded Necklace with Geode for yourself or a friend. The possibilities are endless! The geode pendant is different on either side, so it is like two necklaces in one.
If you prefer a shorter or longer necklace, this tutorial is a perfect solution for the ideal fit. A visit to the craft supply store is a fun way to pick out a variety of beads that reflect your personality.
Sharing is Caring! If you LOVE it, Please PIN it!
Are you too busy to make this DIY Beaded Necklace with Geode Pendant right now? Pin it for later! I'd love for you to pin this project to your favorite craft board on Pinterest and then it’ll be waiting for you when you’re ready.
I'd love to hear what you think about this project, or if you want to know more about jewelry making. If you've made your own necklace projects, I would love to see your creations! Share them on Instagram, and Facebook, or leave a comment/photo on the project pin on Pinterest! #CreativelyBeth
Thanks for stopping by!
